HOME › GUIDES › JETTING CALCULATOR
NICHÉCYCLE EXCLUSIVE TOOL

Mikuni Jetting
Calculator.

Replaces the discontinued MK-550-TNR Pocket Tuner. Enter where your carb is jetted now and where you're riding tomorrow — we'll snap to the nearest genuine Mikuni jet size and link you straight to the part.

Same density model as Mikuni OEM charts
Snaps to real Mikuni jet sizes
Every result links directly to the part
Quick presets:
A
Where it's jetted now
Your current conditions when the carb was set up
B
Where you're riding next
The conditions you'll actually be riding in
Air density correction factor (CF)
Denser air → engine wants more fuel → go richer Thinner air → engine wants less fuel → go leaner Air density essentially unchanged — no re-jet needed
Estimated power change
Recommended jetting for destination conditions
New main jet
no change
Buy this jet
New pilot jet
no change
Buy this jet
Also adjust
Needle clip
Air screw
Mixture shift
← LEANERBASERICHER →
CF = (ρlocal/ρstd)0.24 · ISA formula · Max error 0.9% vs Mikuni/Rotax chart. Always confirm with a spark-plug read.

Jet Family Reference

Choose the right family for your carburetor. If you're unsure, check the jet body — the part number is stamped on the hex face.

Main jet families
Part #FitsSize rangeIncrement
N100.604HS40, HSR42/45/48, RS34–40140–2402.5 / 5 / 10
N102.221SBN carbs (PWC/snowmobile)30–2502.5 / 5 / 10
4/042VM, TM, TMX (Large Hex)50–7205 / 10 / 20
M10/14VM small-bore (Small Hex)60–2605
N151.067BSR non-bleed CV30–2102.5 / 5
N208.099Press-in (various CV)60–2002.5
Pilot jet families
Part #FitsSize rangeIncrement
VM22/210VM, TM, TMX series10–1402.5 / 5 / 10
VM28/486RS34–40, HSR42/45/4810–702.5
BS30/96BSR33, BSR36, BSR4230–602.5
N224.103Small screw-in (BN, BST)10–52.52.5
N151.067PBSR press-in pilot30–602.5

Altitude jetting rules of thumb

3,000 ft
Drop approximately 5 main jet sizes for every 3,000 ft increase in elevation.
30°F Δ
A 30°F temperature rise is roughly equivalent to gaining 1,500 ft in elevation for jetting purposes.
One change
Always change one jet at a time and read your plugs before the next change.
Plug read
Light tan = correct. White = lean (danger). Black/sooty = rich. This calculator is a starting point only.